SaleHot

Ubiquiti NanoStation M5 (NSM5)

The Ubiquiti airMAX NanoStation M5 is an outdoor 5Ghz Customer Premises Equipment (CPE) device that can be used as an access point, connecting to hundreds of devices all at the same time. It can also be used a client, which can be connected to other networks through a bridge.

The Ubiquiti NanoStation M5 proves that efficiency can still be equated to affordability. Even if it’s low cost, its performance is luxurious. It has a maximum transmission speed of about 300 mbps, allowing it to serve multiple devices at one time. The Ubiquiti airMAX NanoStation M5 NSM5 follows the TDMA (Time Division Multiple Access) protocol, which permits users to effectively schedule time slots in order to maximize the transmission and lower the latency period. It works at a frequency of 5.5GHz, a channel that is not prone to noise and interference. The integrated antenna connects via the 2×2 MIMO technology with a reach of 16dBi, so it’s ideal for complexes or buildings made up of different floors. Paired with QoS, you can easily prioritize bandwidth allocation.

Ubiquiti airMAX NSM5 Features

Great Performance
Dual Ethernet Connectivity
PoE Enabled
Frequency 5 GHz
Throughput 150+ Mbps
Range 15+ km

Ubiquiti NanoStation M5 (NSM5)

Add to cart Quick View

Sale

Add to cart

Ubiquiti Networks PBE-5AC-500 PowerBeam ac High-Performance airMAX Bridge

The Ubiquiti Networks PBE-5AC-500 PowerBeam ac is a robust, high-performance airMAX bridge that sets the standard for outdoor wireless networking. This device is specifically engineered for Customer Premises Equipment (CPE) deployments where maximum performance is a must. Utilizing a dish reflector design coupled with Ubiquiti’s proprietary airMAX ac technology, the PowerBeam ac excels in providing significantly increased throughput performance, improved latency, enhanced noise immunity, and superior scalability. Key Features:

High Throughput Performance: Delivers up to 450+ Mb/s, facilitating efficient data transmission across the network.
Extensive Range: Offers a wide operational range of 16+ mi (25+ km), ideal for connecting remote locations.
Innovative InnerFeed Technology: Integrates the radio into the feedhorn of the antenna, eliminating cable losses and enhancing performance.
Proprietary airMAX ac Technology: Improves TDMA latency and network scalability while the custom IC enhances hardware acceleration capabilities.
Robust Processor and Memory: Equipped with an Atheros MIPS 74 Kc, 720 MHz processor and 128 MB DDR2, 8 MB flash memory for smooth operation.
Gigabit Ethernet Port: Features 1 x 10/100/1000 Ethernet port for high-speed connectivity.
Dual Linear Polarization: Provides dual linear polarization to reduce interference and improve signal strength.
Durable Outdoor Design: Outdoor UV stabilized plastic enclosure with pole-mount kit included for easy installation.
Comprehensive Protection: Offers ESD/EMP protection along with resistance to extreme temperatures, humidity, salt fog, vibration, and UV.

Technical Specifications:

Power Supply: 24 V, 0.5 A Gigabit PoE allows for remote power supply and device operation.
Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) for easy and flexible deployment.
Operating Frequency: 5725 – 5850 MHz, ensuring minimal interference in the operating range.
Gain: 27 dBi, maximizing signal strength and reach.
Wind Survivability: Engineered to withstand winds of up to 200 km/h (125 mph), ensuring reliability in harsh conditions.
LED Indicators: Provides instant visual feedback on Power, LAN, and WLAN status.
Advanced Software Features: Software-adjustable signal strength LEDs for customized RSSI levels, and support for various channel sizes in PtP and PtMP modes.

Environmental and Physical Durability:

Tested under severe weather conditions, including salt fog, vibration, temperature shock, and wind-driven rain tests, the PBE-5AC-500 is built to last in the most demanding outdoor environments.

Dimensions and Weight:

Without Randome: 20.47 x 20.47 x 12.13 inches (520 x 520 x 308 mm), weighing 5.18 lb (2.35 kg).
With Randome: 20.67 x 20.67 x 12.40 inches (525 x 525 x 315 mm), weighing 6.95 lb (3.15 kg).

The Ubiquiti Networks PBE-5AC-500 PowerBeam ac airMAX Bridge is a comprehensive solution for establishing reliable, high-speed wireless connections over long distances. It combines cutting-edge technology with robust design to deliver unparalleled performance and durability, making it an ideal choice for network operators and enterprises looking for efficient and scalable outdoor wireless solutions.

Ubiquiti Networks PBE-5AC-500 PowerBeam ac High-Performance airMAX Bridge

Add to cart Quick View

Sale

Add to cart

Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge

The Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge is suitable for CPE deployments requiring maximum performance. A dish reflector design with proprietary airMAX ac technology, offers improved latency, noise immunity, scalability, and significantly increased throughput performance of up to 450+ Mb/s and also offers wide range of 19+ mi (30+ km). The InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance while eliminating cable losses. Ubiquiti’s airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

The PowerBeam ac’s enhanced beam directivity provides optimal performance in high-noise environments. The TDMA airMAX protocol enables optimal scalability, high throughput, and low latency in unlicensed, multi-point networks. It supports airMAX ac protocol and has a long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Integrated airMAX ac technology boosts the advantages of proprietary TDMA protocol. The mounting bracket of the PowerBeam offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt.

Noise Immunity

The PowerBeam ac directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, to improve noise immunity. This feature is important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the PowerBeam ac is versatile and cost-effective to deploy.

airOS

Designed for improved usability, airOS v7 is the enhanced operating system for Ubiquiti airMAX ac. It supports airMAX ac protocol and has long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Additionally, this PowerBeam features automatic/manual transmit power control, automatic distance selection (ACK timing), and a strong WPA2 security.

Usability Enhancements

airOS offers usability enhancements such as dynamic configuration changes*, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including Ethernet cabling test, RF diagnostics, and airView spectrum analyzer. 1

Advanced RF Analytics

airMAX ac devices feature a multi-radio architecture to power an enhanced RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which analyzes the full 5 GHz spectrum and every received symbol to provide you with the advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the main tab and airView Spectrum analyzer of airOS V7.

Real-Time Reporting

The main tab displays the RF information such as, persistent RF Error Vector Magnitude (EVM) constellation diagrams, Carrier to Interference-plus-Noise Ratio (CINR) histograms, and Signal-to-Noise Ratio (SNR) time series plots.

Spectral Analysis

airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView constantly monitors environmental noise, collects energy data points in real-time spectral views, and helps optimize channel selection, network design, and wireless performance. airView runs in the background without disabling the wireless link, so there is no disruption to the network.

In airView, there are three spectral views, each of which represents different data. Waterfall represents aggregate energy collected for each frequency, Waveform represents aggregate energy collected, and ambient noise level background represents noise energy shown as a function of frequency. airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.

airMAX Technology

Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class. With Intelligent QoS priority assigned to voice/video for seamless streaming it is capable of high-speed, carrier-class links with long distance.

airMAX ac Technology

The airMAX ac technology boosts the advantages of proprietary TDMA protocol. Ubiquiti’s airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

Throughput Breakthrough

airMAX ac supports high data rates, which require dense modulation, 256QAM is a significant increase from 64QAM, which is used in airMAX. With the use of proprietary airMAX ac technology, airMAX ac products supports up to 450+ Mb/s real TCP/IP throughput up to triple the throughput of standard airMAX products.

Innovative Mechanical Design

The mounting bracket of the PowerBeam offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt. Only a single wrench is required to mount the PowerBeam ac on a pole. The antenna feed can be detached with the push of a button. Its fasteners are GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners. Dish and brackets are made of galvanized steel that is powder-coated for enhanced corrosion resistance. The pole bracket design prevents paint from being removed from the metal brackets for improved corrosion resistance.

PERFORMANCE
Processor	Atheros MIPS 74 Kc, 720 MHz
Memory	128 MB DDR2, 8 MB flash
Networking Interface	1 x 10/100/1000 Ethernet port
Wireless Approvals	FCC, IC, CE
RoHS Compliance	Yes
Power Supply	24 V, 0.5 A Gigabit PoE
Power Method	Passive PoE (Pairs 4, 5+, 7, 8 Return)
Voltage Range	20 to 26 VDC
Max Power Consumption	8.5 W
Gain	29 dBi
Operating Frequency	5725 – 5850 MHz
Wind Loading	872 N at 200 km/h (196 lbf at 125 mph)
Wind Survivability	200 km/h (125 mph)
LEDs	1 x Power 1 x LAN 4 x WLAN
Signal Strength LEDs	Software-adjustable to correspond to custom RSSI levels
Channel Sizes	PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz
Polarization	Dual linear
Enclosure	Outdoor UV stabilized plastic
Mounting	Pole-mount kit included
ESD/EMP Protection	Air: ± 24 kV Contact: ± 24 kV
Operating Temperature	-40 to 158°F / -40 to 70°C
Operating Humidity	5 to 95% non-condensing
Salt Fog Test	IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test	IEC 68-2-6
Temperature Shock Test	IEC 68-2-14
UV Test	IEC 68-2-5 at 104°F (40° C), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test	ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Output Power	Output Power: 24 dBm TX Power Specifications Data Rate / Avg. TX / Tolerance airMAX ac 1x BPSK (½) 24 dBm ± 2 dB 2x QPSK (½) 24 dBm ± 2 dB 2x QPSK (¾) 24 dBm ± 2 dB 4x 16QAM (½) 24 dBm ± 2 dB 4x 16QAM (¾) 24 dBm ± 2 dB 6x 64QAM (2/3) 23 dBm ± 2 dB 6x 64QAM (¾) 23 dBm ± 2 dB 6x 64QAM (5/6) 22 dBm ± 2 dB 8x 256QAM (¾) 20 dBm ± 2 dB 8x 256QAM (5/6) 20 dBm ± 2 dBRX Power Specifications Data Rate / Sensitivity / Tolerance airMAX ac 1x BPSK (½) -96 dBm ± 2 dB 2x QPSK (½) -95 dBm ± 2 dB 2x QPSK (¾) -92 dBm ± 2 dB 4x 16QAM (½) -90 dBm ± 2 dB 4x 16QAM (¾) -86 dBm ± 2 dB 6x 64QAM (2/3) -83 dBm ± 2 dB 6x 64QAM (¾) -77 dBm ± 2 dB 6x 64QAM (5/6) -74 dBm ± 2 dB 8x 256QAM (¾) -69 dBm ± 2 dB 8x 256QAM (5/6) -65 dBm ± 2 dB
VSWR	1.6:1
Built-In Mechanical Downtilt	+15° to -15°
Dimensions	24.41 x 24.41 x 15.20″ / 620 x 620 x 386 mm
Weight	14.11 lb / 6.40 kg

PACKAGING INFO
Package Weight	22.5 lb
Box Dimensions (LxWxH)	29.0 x 28.0 x 9.5″

Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge

Add to cart Quick View

Sale

Add to cart

Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge

The Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge is suitable for CPE deployments requiring maximum performance. A dish reflector design with proprietary airMAX ac technology, offers improved latency, noise immunity, scalability, and significantly increased throughput performance of up to 450+ Mb/s and also offers wide range of 19+ mi (30+ km). The InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance while eliminating cable losses. Ubiquiti’s airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

The PowerBeam ac’s enhanced beam directivity provides optimal performance in high-noise environments. The TDMA airMAX protocol enables optimal scalability, high throughput, and low latency in unlicensed, multi-point networks. It supports airMAX ac protocol and has a long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Integrated airMAX ac technology boosts the advantages of proprietary TDMA protocol. The mounting bracket of the PowerBeam offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt.

Noise Immunity

The PowerBeam ac directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, to improve noise immunity. This feature is important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the PowerBeam ac is versatile and cost-effective to deploy.

airOS

Designed for improved usability, airOS v7 is the enhanced operating system for Ubiquiti airMAX ac. It supports airMAX ac protocol and has long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Additionally, this PowerBeam features automatic/manual transmit power control, automatic distance selection (ACK timing), and a strong WPA2 security.

Usability Enhancements

airOS offers usability enhancements such as dynamic configuration changes*, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including Ethernet cabling test, RF diagnostics, and airView spectrum analyzer. 1

Advanced RF Analytics

airMAX ac devices feature a multi-radio architecture to power an enhanced RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which analyzes the full 5 GHz spectrum and every received symbol to provide you with the advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the main tab and airView Spectrum analyzer of airOS V7.

Real-Time Reporting

The main tab displays the RF information such as, persistent RF Error Vector Magnitude (EVM) constellation diagrams, Carrier to Interference-plus-Noise Ratio (CINR) histograms, and Signal-to-Noise Ratio (SNR) time series plots.

Spectral Analysis

airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView constantly monitors environmental noise, collects energy data points in real-time spectral views, and helps optimize channel selection, network design, and wireless performance. airView runs in the background without disabling the wireless link, so there is no disruption to the network.

In airView, there are three spectral views, each of which represents different data. Waterfall represents aggregate energy collected for each frequency, Waveform represents aggregate energy collected, and ambient noise level background represents noise energy shown as a function of frequency. airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.

airMAX Technology

Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class. With Intelligent QoS priority assigned to voice/video for seamless streaming it is capable of high-speed, carrier-class links with long distance.

airMAX ac Technology

The airMAX ac technology boosts the advantages of proprietary TDMA protocol. Ubiquiti’s airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

Throughput Breakthrough

airMAX ac supports high data rates, which require dense modulation, 256QAM is a significant increase from 64QAM, which is used in airMAX. With the use of proprietary airMAX ac technology, airMAX ac products supports up to 450+ Mb/s real TCP/IP throughput up to triple the throughput of standard airMAX products.

Innovative Mechanical Design

The mounting bracket of the PowerBeam offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt. Only a single wrench is required to mount the PowerBeam ac on a pole. The antenna feed can be detached with the push of a button. Its fasteners are GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners. Dish and brackets are made of galvanized steel that is powder-coated for enhanced corrosion resistance. The pole bracket design prevents paint from being removed from the metal brackets for improved corrosion resistance.

Performance
Processor	Atheros MIPS 74 Kc, 720 MHz
Memory	128 MB DDR2, 8 MB flash
Networking Interface	1 x 10/100/1000 Ethernet port
Wireless Approvals	FCC, IC, CE
RoHS Compliance	Yes
Power Supply	24 V, 0.5 A Gigabit PoE
Power Method	Passive PoE (Pairs 4, 5+, 7, 8 Return)
Voltage Range	20 to 26 VDC
Max Power Consumption	8.5 W
Gain	29 dBi
Operating Frequency	5725 – 5850 MHz
Wind Loading	872 N at 200 km/h (196 lbf at 125 mph)
Wind Survivability	200 km/h (125 mph)
LEDs	1 x Power 1 x LAN 4 x WLAN
Signal Strength LEDs	Software-adjustable to correspond to custom RSSI levels
Channel Sizes	PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz
Polarization	Dual linear
Enclosure	Outdoor UV stabilized plastic
Mounting	Pole-mount kit included
ESD/EMP Protection	Air: ± 24 kV Contact: ± 24 kV
Operating Temperature	-40 to 158°F / -40 to 70°C
Operating Humidity	5 to 95% non-condensing
Salt Fog Test	IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test	IEC 68-2-6
Temperature Shock Test	IEC 68-2-14
UV Test	IEC 68-2-5 at 104°F (40° C), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test	ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Output Power	Output Power: 24 dBm TX Power Specifications Data Rate / Avg. TX / Tolerance airMAX ac 1x BPSK (½) 24 dBm ± 2 dB 2x QPSK (½) 24 dBm ± 2 dB 2x QPSK (¾) 24 dBm ± 2 dB 4x 16QAM (½) 24 dBm ± 2 dB 4x 16QAM (¾) 24 dBm ± 2 dB 6x 64QAM (2/3) 23 dBm ± 2 dB 6x 64QAM (¾) 23 dBm ± 2 dB 6x 64QAM (5/6) 22 dBm ± 2 dB 8x 256QAM (¾) 20 dBm ± 2 dB 8x 256QAM (5/6) 20 dBm ± 2 dBRX Power Specifications Data Rate / Sensitivity / Tolerance airMAX ac 1x BPSK (½) -96 dBm ± 2 dB 2x QPSK (½) -95 dBm ± 2 dB 2x QPSK (¾) -92 dBm ± 2 dB 4x 16QAM (½) -90 dBm ± 2 dB 4x 16QAM (¾) -86 dBm ± 2 dB 6x 64QAM (2/3) -83 dBm ± 2 dB 6x 64QAM (¾) -77 dBm ± 2 dB 6x 64QAM (5/6) -74 dBm ± 2 dB 8x 256QAM (¾) -69 dBm ± 2 dB 8x 256QAM (5/6) -65 dBm ± 2 dB
VSWR	1.6:1
Built-In Mechanical Downtilt	+15° to -15°
Dimensions	24.41 x 24.41 x 15.20″ / 620 x 620 x 386 mm
Weight	14.11 lb / 6.40 kg

Packaging Info
Package Weight	22.5 lb
Box Dimensions (LxWxH)	29.0 x 28.0 x 9.5″

Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge

Add to cart Quick View

Sale

Add to cart

Ubiquiti Networks U-POE-AT PoE adapter Gigabit Ethernet

Ubiquiti Networks U-PoE-AT Compact adapter capable of delivering 30W of PoE+ to the U6 LR, U6 Pro, and other PoE+ devices. The PoE+ Injector (U PoE AT) is designed to power PoE+ devices. The U PoE AT delivers up to 30W of PoE+ that can be used to power the UniFi6 Long-Range (U6 LR), UniFi6 Pro (U6 Pro), and other devices that adhere to the PoE+ standard. It also provides enhanced protection against electrical surges. Features:

Delivers up to 30W of PoE+
Compatible with the U6 LR, U6 Pro, and other PoE+ devices
Surge and clamping protection
AC cable with earth ground

Specification:

Model	U-POE-at
Dimensions	93 x 62 x 35 mm (3.66 x 2.44 x 1.38″)
Weight	156 g (5.5 oz)
Output Voltage	48VDC @ 0.65A
LAN Activity Indicator	No
Gigabit LAN Port	Yes
Remote Reset Capability	Yes
Reset Button	No
Rated Voltage	100-240VAC @ 50/60Hz
Input Current	0.75A@90VAC
Inrush Current	<100A Peak @230VAC, 26℃
Efficiency	87%
Output Ripple	1% Max.
Switching Frequency	70 kHz Max.
Line Regulation	≤ 3%
Load Regulation	≤ 5%
2-Pair Powering	Pins 4, 5 (+) and Pins 7, 8 (-)
4-Pair Powering	–
Operating Temperature	0 to 40° C (32 to 104° F)
Storage Temperature	-30 to 70°C (-22 to 158° F)
Operating Humidity	35 to 90% Noncondensing
AC Connector	IEC-320 C6
Data IN / PoE	RJ45 Shielded Socket
Surge Protection	Difference and Common Mode
Clamping Protection	11V Data, 60V Power
Max. Surge Discharge	1500A (8/20 μs) Power
Peak Pulse Current	36A (10/1000 μs) Data
Shunt Capacitance	<5 pF data
Response Time	<1 ns
Certifications	CE, FCC, IC, UL

Ubiquiti Networks U-POE-AT PoE adapter Gigabit Ethernet

Add to cart Quick View

Sale

Add to cart

Ubiquiti Networks UniFi U7 Pro Tri-Band Wi-Fi 7 Access Point

The Ubiquiti Networks UniFi U7 Pro Tri-Band Wi-Fi 7 Access Point is designed to provide high-performance wireless networking for demanding environments. Here’s a brief description: Introducing the Ubiquiti UniFi WiFi 7 Access Point PRO (U7-PRO), the pinnacle of wireless networking technology. Engineered to excel in demanding environments, this ceiling-mounted AP revolutionizes connectivity with its robust design and cutting-edge features. Experience the Future of Wireless: Upgrade to WiFi 7 compatibility with 6 GHz support, ensuring blazing-fast speeds and minimal interference, even in densely populated areas. Unrivaled Performance: Utilizing 6 spatial streams, the U7-PRO optimizes network efficiency and enhances throughput for seamless data transmission across your network. Exceptional Coverage, Every Corner Covered: With a coverage area of up to 140 m² (1,500 ft²), eliminate dead zones and ensure reliable connectivity throughout your facility, from offices to campuses and beyond. Unmatched Device Capacity: Supporting over 300 connected devices, including IoT gadgets, smartphones, and laptops, without compromising performance or reliability. Effortless Deployment: Powered by PoE+ and featuring a 2.5 GbE uplink, installation is a breeze, offering flexibility and convenience while ensuring high-speed data transfer and low-latency performance. Built to Last: Crafted with durable polycarbonate and metal enclosures, the U7-PRO is designed to withstand the rigors of demanding environments, ensuring longevity and reliability. Elevate your wireless network to unprecedented levels of performance and reliability with the Ubiquiti UniFi WiFi 7 Access Point PRO. Experience the future of connectivity today.

Tri-Band Technology: This access point operates on three bands: 2.4 GHz, 5 GHz low, and 5 GHz high. Tri-band technology helps to optimize performance by balancing client load across multiple frequencies.
Wi-Fi 7 Support: The U7 Pro supports the latest Wi-Fi 7 standard, providing faster speeds, higher capacity, and improved efficiency compared to previous Wi-Fi standards. This makes it ideal for bandwidth-intensive applications and dense wireless environments.
High Throughput: With Wi-Fi 7 capabilities and advanced antenna technology, the U7 Pro offers high throughput to support simultaneous connections from multiple devices without sacrificing performance.
Enterprise-grade Security: Security features such as WPA3 encryption and advanced firewall capabilities help to secure your wireless network and protect against unauthorized access.
Scalability and Management: The UniFi Controller software allows for easy deployment, configuration, and management of multiple UniFi access points from a centralized interface. This makes it suitable for both small-scale deployments and large enterprise networks.
Sleek Design: The U7 Pro features a sleek and modern design, making it suitable for installation in various environments, including offices, schools, hotels, and retail spaces.
Power over Ethernet (PoE) Support: The access point can be powered via PoE, simplifying installation and eliminating the need for a separate power source near the device.

Specifications:

Dimensions: Ø206 x 46 mm (Ø8.1 x 1.8″)
Weight: 680 g (1.5 lb)
Networking Interface: (1) 1/2.5 GbE RJ45 port
Power Method: PoE+
Max. Power Consumption: 21W
Wireless Standards: 802.11a/b/g/n/ac/ax/be
Max. TX Power: 2.4 GHz: 22 dBm, 5 GHz: 26 dBm, 6 GHz: 23 dBm
Operating Temperature: -30 to 60° C (-22 to 140° F)
Certifications: CE, FCC, IC

Application Requirements:

UniFi Network: Version 8.0.26 and later
UniFi OS: Version 3.2 and late

Ubiquiti Networks UniFi U7 Pro Tri-Band Wi-Fi 7 Access Point

Add to cart Quick View

Sale

Add to cart

Ubiquiti Networks UniFi US-8-150W network switch

Expand and power your network with the UniFi Switch 8 150W, part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch 8 150W is a fully managed PoE+ Gigabit switch, delivering robust performance and intelligent switching for enterprise networks. The UniFi Switch 8 150W offers the flexibility of (8) Gigabit RJ45 ports with auto-sensing PoE+ or 24V Passive PoE to power your UniFi access points and other PoE devices. Additionally, two SFP ports provide uplink and fiber connectivity options capable of delivering speeds of up to 1 Gbps each. The UniFi Switch 8 150W supports up to 10 Gbps total, non-blocking line rate.

Ubiquiti Networks UniFi US-8-150W network switch

Add to cart Quick View

Sale

Add to cart

Ubiquiti PowerBeam 5AC-500 (PBE‑5AC‑500)

Description

Ubiquiti PBE-5AC-500-US PowerBeam AC

Ubiquiti PBE-5AC-500-US PowerBeam AC offers improved latency, scalability, noise immunity, and significantly increased throughput performance of up to 450+ Mb/s internet speed. It provides a wide range of 16+ mi (25+ km). The InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna.

PowerBeam ac directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, to improve noise immunity. This feature is important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the PowerBeam ac is versatile and cost-effective to deploy.

airOS

Designed for improved usability, airOS v7 is the enhanced operating system for Ubiquiti airMAX ac. It supports airMAX ac protocol and has long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Additionally, this PowerBeam features automatic/manual transmit power control, automatic distance selection (ACK timing), and a strong WPA2 security.

Usability Enhancements

airOS offers usability enhancements such as dynamic configuration changes*, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including Ethernet cabling test, RF diagnostics, and airView spectrum analyzer.

Ubiquiti Networks AirMAX Specs

Model: PBE-5AC-500
Frequency Range: 5.15 - 5.85 GHz
Gain: 27 dBi
Antenna: Integrated Dish Reflector
Polarization: Dual Linear
Max. VSWR: 1.5:1
Beamwidth: 25°
Dimensions: 748 x 748 x 349 mm (29.45 x 29.45 x 13.74 inches)
Weight: 3.16 kg (6.97 lbs)
Enclosure: Outdoor UV Stabilized Plastic
Operating Temperature: -40 to 70°C (-40 to 158°F)
Humidity: 5 to 95% Non-Condensing
Wind Loading: 311 N @ 200 km/h (70 lbf @ 125 mph)
Wind Survivability: 200 km/h (125 mph)
Networking Interface: 1 x 10/100/1000 Mbps Ethernet Port
Max. Power Consumption: 8.5W
Power Supply: 24V, 0.5A GigE PoE Adapter (Included)
Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
ESD/EMP Protection: ±24 kV Contact/Air
LEDs: Power, LAN, (4) Signal Strength
Processor: MIPS 74Kc, 720 MHz
Memory: 128 MB DDR2 SDRAM
Flash Storage: 16 MB
Latency: < 5 ms
Throughput: Up to 450 Mbps
Mounting: Pole Mount (Kit Included)
RoHS Compliance: Yes
Certifications: CE, FCC, IC

Ubiquiti PowerBeam 5AC-500 (PBE‑5AC‑500)

Add to cart Quick View

Sale

Add to cart

Ubiquiti RocketDish | 5GHz 30dBi RD-5G30

The Ubiquiti RocketDish RD-5G30 is a powerful, high-gain antenna designed to enhance your network’s performance over long distances. When paired with the Ubiquiti Rocket M, it forms an unbeatable duo for 2×2 MIMO PtP bridging applications, offering carrier-class performance at breakthrough price points. This seamless integration between the Rocket M and the RocketDish RD-5G30 provides network architects with unmatched flexibility and convenience for setting up robust, high-speed wireless networks.

Key Features

High Gain for Extended Range: With a gain of up to 30dBi, the RocketDish RD-5G30 is optimized for the 5GHz frequency band, ensuring high performance over long distances.
Carrier-Class Performance: Designed to support the demands of modern networks, this antenna delivers reliable, high-speed connectivity that can handle the needs of both businesses and internet service providers.
Seamless Integration with Rocket M: The RocketDish is specifically designed to work with the Ubiquiti Rocket M series, allowing for easy setup and optimal performance with no need for special tools or complicated configurations.
Durable Design for All Weather Conditions: Includes a Rocket mount and weatherproof RF jumpers, ensuring that your network remains operational in any environmental conditions.
Precision Alignment: The antenna features a 5° HPOL and VPOL beamwidth for precise alignment, minimizing interference and maximizing performance in point-to-point (PtP) bridging applications.

Technical Specifications

Dimensions: 650 x 650 x 304 mm (25.6 x 25.6 x 11.97 inches)
Weight: 9.8 kg (21.61 lb)
Frequency Range: 4.9 – 5.8 GHz
Gain: 26 dBi at 4.9 GHz, 30 dBi at 5 – 5.9 GHz
Polarization: Dual-Linear
Max. VSWR: 1.4:1
Wind Survivability: Up to 200 km/h (125 mph)
Mounting: Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors Included

Conclusion

The Ubiquiti RocketDish RD-5G30 is an essential component for anyone looking to deploy a high-performance, long-range network. Its high gain, carrier-class performance, and seamless integration with the Rocket M make it an ideal choice for a wide range of applications, from business networks to internet service providers. With its robust design and precision engineering, the RocketDish RD-5G30 is built to deliver unparalleled performance, reliability, and ease of installation.

Ubiquiti RocketDish | 5GHz 30dBi RD-5G30

Add to cart Quick View

Sale

Add to cart

Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point

The Ubiquiti UniFi UAP-AC-LR access point is ideal for long-range deployments. It offers simultaneous, dual-band operation, with 3×3 MIMO in the 2.4 GHz band and 2×2 MIMO in the 5 GHz band. The antenna gain of the UAP-AC-LR performs better than one-way, high transmit power does for connecting distant clients. UniFi is the revolutionary Wi-Fi system that combines enterprise performance, unlimited scalability, and a central management controller. UniFi 802.11AC Dual Radio Access Points (APs) have a refined industrial design and can be easily installed using the included mounting hardware.

Easily accessible through any standard web browser, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance. Use the UniFi Controller software to quickly configure and administer an enterprise Wi-Fi network – no special training required. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated.

Unifi UAP-AC-LR Access Point Key Highlights

Innovative long range antenna provides a wide symmetrical-link coverage area
Nearly half the size of the standard UniFi AP
Newly designed UniFi Controller optimises RF Performance
Gigabit, integrated PoE with POE Injector included
UK Power Supply Cord for POE Injector included
Range 183m (600ft)

What’s in the Box?

UniFi AC LR Access Point
Ceiling/Wall Mount Kits
Gigabit PoE Adapter (24V,0.5A)
Quick Start Guide

Ubiquiti UniFi AP AC LR – Technical Specifications

General

Dimensions 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70″)
Weight 240 g (8.5 oz) With Mounting Kits 315 g (11.1 oz)
Networking Interface (1) 10/100/1000 Ethernet Port
Buttons Reset
Antennas (1) Dual-Band Antenna, Tri-Polarity, 3 dBi
Wi-Fi Standards 802.11 a/b/g/n/ac
Power Method Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return)
Power Supply 24V, 0.5A Gigabit PoE Adapter*
Maximum Power Consumption 6.5W
Maximum TX Power 2.4 GHz 22 dBm 5 GHz 24 dBm
BSSID Up to Four per Radio
Power Save Supported
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Certifications CE, FCC, IC
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing * Only the single-pack of the UAP-AC-LR includes a PoE adapter.

Advanced Traffic Management

VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 200+

Supported Data Rates (Mbps)

Standard Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point

Add to cart Quick View

Sale

Add to cart

Ubiquiti UAP-nanoHD Wireless Access Point AP

Ubiquiti UAP-nanoHD Wireless Access Point AP is a wireless access point (AP) developed by Ubiquiti Networks. It is part of Ubiquiti’s UniFi product line, which offers enterprise-grade networking equipment for both small and large-scale deployments. The UAP-nanoHD is designed to provide high-performance Wi-Fi connectivity in a compact form factor. It supports the latest Wi-Fi 5 (802.11ac) and Wi-Fi 6 (802.11ax) standards, allowing for faster data transfer speeds and improved network capacity compared to older Wi-Fi standards. It operates on both the 2.4 GHz and 5 GHz frequency bands, providing dual-band concurrent connectivity. One of the key features of the UAP-nanoHD is its advanced antenna technology. It utilizes multiple radio chains and specialized antenna elements to deliver reliable and efficient wireless coverage. This helps to mitigate signal interference and optimize network performance, especially in crowded environments. The UAP-nanoHD can be managed using Ubiquiti’s UniFi Controller software, which provides a centralized interface for configuring and monitoring multiple access points across a network. The UniFi Controller also offers advanced features such as guest network management, VLAN support, and seamless roaming capabilities. With its small size and sleek design, the UAP-nanoHD is suitable for various deployment scenarios, including offices, hotels, retail spaces, and residential environments. It can be mounted on walls or ceilings, offering flexible installation options to ensure optimal coverage.

Deploy the Unifi nanohd AP in high-density environments requiring maximum wireless performance and minimal footprint. The Unifi nanohd AP features simultaneous, Dual-Band, 4×4 MU-MIMO technology and convenient 802.3af PoE compatibility. The Unifi nanohd AP can be powered by an 802.3af PoE compliant switch. We recommend powering your unified devices with a unified PoE switch (sold separately). The Unifi nanohd AP is compatible with all Unifi PoE switches and 48V adapters.

key features of the UAP-nanoHD:

Wi-Fi Standards: The UAP-nanoHD supports both Wi-Fi 5 (802.11ac) and Wi-Fi 6 (802.11ax) standards. This allows for faster data transfer speeds, improved network capacity, and enhanced performance compared to older Wi-Fi standards.
Dual-Band Operation: The UAP-nanoHD operates on both the 2.4 GHz and 5 GHz frequency bands simultaneously. This provides flexibility and allows devices to connect to the most suitable frequency band based on their capabilities and network conditions.
Multiple-Input Multiple-Output (MIMO) Technology: The access point utilizes MIMO technology, which uses multiple antennas to improve signal quality, enhance throughput, and reduce interference. It supports up to 4×4 MIMO on the 5 GHz band and 2×2 MIMO on the 2.4 GHz band.
Advanced Antenna Technology: The UAP-nanoHD incorporates specialized antenna elements and multiple radio chains to deliver reliable and efficient wireless coverage. This helps to optimize signal strength, minimize dead zones, and provide better overall performance.
High-Speed Data Transfer: With support for the latest Wi-Fi standards, the UAP-nanoHD can achieve fast data transfer rates. It can deliver speeds of up to 1.7 Gbps on the 5 GHz band and up to 300 Mbps on the 2.4 GHz band, depending on the capabilities of the client devices.
Power over Ethernet (PoE): The UAP-nanoHD can be powered using Power over Ethernet (PoE) technology. This eliminates the need for a separate power source and simplifies installation, particularly in areas where power outlets are not easily accessible.
UniFi Controller Management: The UAP-nanoHD is managed using the UniFi Controller software, which provides a centralized platform for configuration, monitoring, and management of Ubiquiti access points. The UniFi Controller offers a user-friendly interface with features such as real-time analytics, guest network management, VLAN support, and seamless roaming.
Scalability and Roaming: The UAP-nanoHD is designed to work seamlessly with other UniFi access points, allowing for easy scalability and expansion of the network. It supports fast roaming, enabling connected devices to switch between access points without experiencing disruptions or dropped connections.
Sleek Design and Mounting Options: The UAP-nanoHD features a compact and sleek design, making it suitable for various deployment scenarios. It can be easily mounted on walls or ceilings, offering flexible installation options to ensure optimal coverage and aesthetics.

Specifications for the Ubiquiti UAP-nanoHD wireless access point (AP):

Physical:

Dimensions: 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29″)
Weight: 300 g (10.58 oz)
Enclosure: Polycarbonate

Networking Interface:

(1) 10/100/1000 Ethernet Port

Wi-Fi Standards:

802.11a/b/g/n/ac/ac-wave2, Wi-Fi 6 (802.11ax)

Wi-Fi Frequency Bands:

2.4 GHz, 5 GHz

Antennas:

(2) Dual-Band Antennas, Single-Polarity

Wi-Fi Speeds:

2.4 GHz: 300 Mbps
5 GHz: 1733 Mbps

MIMO:

2×2 MIMO on 2.4 GHz, 4×4 MIMO on 5 GHz

Power Method:

802.3af PoE, 802.3at PoE+

Power Supply:

UniFi Switch (PoE)
802.3af/at PoE Injector (not included)

Power Save:

Supported

Wireless Security:

WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)

BSSID:

Up to 8 per Radio

Operating Temperature:

-10 to 70°C (14 to 158°F)

Operating Humidity:

5 to 95% Noncondensing

Certifications:

CE, FCC, IC

Mounting:

Wall/Ceiling (Kits Included)

Management Interface:

UniFi Controller Software

Ubiquiti UAP-nanoHD Wireless Access Point AP

Add to cart Quick View

Sale

Add to cart

Ubiquiti UDM-PRO UniFi Dream Machine PRO

The Ubiquiti UDM-PRO UniFi Dream Machine PRO is a network security gateway device designed for small to medium-sized businesses and home networks. It is a combination of a router, switch, and access point with advanced features such as IDS/IPS, VPN server, and more. The UDM-PRO features an 8-port gigabit switch with 10G SFP+ ports, providing high-speed connectivity for wired devices. It also has a built-in 802.11ac Wave 2 access point, providing wireless connectivity with up to 1.7 Gbps speeds. In terms of security, the UDM-PRO has a built-in Intrusion Detection System/Intrusion Prevention System (IDS/IPS) that can detect and block network attacks. It also has a built-in VPN server that supports site-to-site and client-to-site VPNs, allowing remote access to the network. The UDM-PRO is managed through the UniFi Controller software, which provides an easy-to-use interface for configuring and monitoring the network. The software also provides advanced features such as network statistics, guest portal, and more. specifications for the Ubiquiti UDM-PRO UniFi Dream Machine PRO: Dimensions and weight:

Dimensions: 442.4 x 43.7 x 285.6 mm (17.42 x 1.72 x 11.24″)
Weight: 3.90 kg (8.60 lb)

Networking Interfaces:

(8) 10/100/1000 RJ45 LAN Ports
(1) 10/100/1000 RJ45 WAN Port
(1) 10G SFP+ LAN Port
(1) 10G SFP+ WAN Port

Wi-Fi:

802.11a/b/g/n/ac Wave 2
4×4 MU-MIMO with up to 1.7 Gbps aggregate radio rate
Supports both 2.4GHz and 5GHz bands

IDS/IPS:

Hardware-accelerated IDS/IPS engine for efficient network protection
Deep packet inspection (DPI) with customizable threat management

VPN:

Integrated VPN server for secure remote access
Supports site-to-site and client-to-site VPNs
Easy-to-use VPN interface for configuring and managing VPN connections

Management:

UniFi Network app and UniFi Network Controller for easy network management
Web browser access via UniFi Network Controller
Advanced network statistics and monitoring
Guest portal and hotspot support

Hardware:

1.3 GHz quad-core processor
2 GB DDR RAM
16 GB eMMC storage
Fanless design for quiet operation

Power:

Internal 100-240V AC/50-60 Hz, 1.5A power supply
Power consumption: 33W (max)

Ubiquiti UDM-PRO UniFi Dream Machine PRO

Add to cart Quick View

Sale

Add to cart

Ubiquiti UniFi 24-Port PoE Switch (USW-24-PoE)

Features:

(1) 1.3″ LCM color touchscreen with AR switch management
(16) GbE, 802.3at PoE+ RJ45 ports
(8) GbE RJ45 ports
(2) 1G SFP ports
95W total PoE supply
Fanless, silent cooling

Scalable UniFi Network Controller

Management Capabilities The UniFi Network Controller can provision UniFi devices, map
out networks, and quickly manage system traffic. Important
network details are logically organized for a simplified, yet
powerful, interface. Network Overview From a single pane of glass, view network topology and
configuration, real‑time statistics, and debugging metrics. Monitor
your network’s vitals and make on‑the‑fly adjustments as needed.
Deep Packet Inspection
Ubiquiti’s proprietary Deep Packet Inspection (DPI) engine includes
the latest application identification signatures to track which
applications (and IP addresses) are using the most bandwidth. Detailed Analytics The UniFi Network Controller provides configurable reporting
and analytics to manage large user populations and expedite
troubleshooting. Advanced search and sorting capabilities make
network management more efficient. Multi-Site Management A single controller running in the cloud can manage multiple
sites: multiple, distributed deployments and multi‑tenancy for
managed service providers. Each site is logically separated and
has its own configuration, maps, statistics, guest portal, and
administrator accounts. Switch Configuration You can access any managed UniFi Switch through the UniFi
Controller to configure a variety of features:
• Operation mode (switching, mirroring, or aggregate) per port
• Network/VLAN configuration
• Jumbo frame and flow control services
• Network settings
• Storm control setting per port
• Spanning tree configuration
• 802.1X control and RADIUS VLAN
• Debug terminal option for command‑line interface Switch Port Status You can also view status information for each port:
• Connection speed and duplex mode
• TX/RX data rates
• Network/VLAN settin Software Features The UniFi Network Controller software offers the following features:
• Centralized configuration management (including configuration
cloning)
• Auto‑MDIX automatically adjusts as needed for straight through
or crossover cable
• 802.1X (RADIUS) authentication and dynamic VLAN.

Ubiquiti UniFi 24-Port PoE Switch (USW-24-PoE)

Add to cart Quick View

Sale

Add to cart

Ubiquiti UniFi 48-Port PoE Switch (USW-48-PoE)

The Ubiquiti UniFi USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports, and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-48-PoE features a 1.3″ touch LCM to provide status. Ubiquiti UniFi USW-48-PoE Switch key features

(48) Gigabit Ethernet Ports including (32) 802.3at PoE+
(4) 1G SFP Ports
1.3″ touch LCM
Managed by UniFi Controller
210W Power supply

Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-48-PoE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. Near silent cooling Ubiquiti’s new airflow design reduces the need for fan usage. Touch screen display The 1.3″ touchscreen display allows easy monitoring and quick troubleshooting

Ubiquiti UniFi USW-48-PoE Switch Technical Specification

Product Specifications

Dimensions: 442.4 x 285 x 43.7 mm (17.42 x 11.22 x 1.72″)
Weight: 4.52 kg (9.97 lb)
Weight with Brackets: 4.61 kg (10.16 lb)
Interfaces: – Networking: (48) 10/100/1000 RJ45 Ports, (4) 1G SFP Ethernet Ports – Management: Ethernet In-Band
Total Non-Blocking Throughput: 52 Gbps
Switching Capacity: 104 Gbps
Forwarding Rate: 77.38 Mpps
Power Method: 100-240VAC, 50/60 Hz, Universal Input
Power Supply: AC/DC, Internal, 240W
Voltage Range: 100 to 240VAC
Max Power Consumption (Excluding PoE Output): 45W
LEDs: – RJ45 Data Ports: PoE; Speed/Link/Activity – SFP Data Ports: Link/Activity
ESD/EMP Protection: Air: ± 16 kV, Contact: ± 12 kV
Shock and Vibration: ETSI300-019-1.4 Standard
Operating Temperature: -5 to 40° C (23 to 104° F)
Operating Humidity: 10 – 90% Noncondensing
Certifications: CE, FCC, IC

PoE

Total Available PoE: 195W
PoE Interfaces Ports 1-32: PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-)
Max. PoE Wattage per Port by PSE: – 802.3at: 32W
Voltage Range 802.3af Mode: 44-57V
Voltage Range 802.3at Mode: 50-57V

Ubiquiti UniFi 48-Port PoE Switch (USW-48-PoE)

Add to cart Quick View

Sale

Add to cart

Ubiquiti Unifi AC HD (UAP-AC-HD)

Specs (View datasheet) -Environment: Indoor/outdoor -2.4 GHz rate: 800 Mbps -5 GHz rate: 1733 Mbps -PoE Mode: 802.3at PoE+ -Max power consumption: 17W -Ports: (2) 10/100/1000 Ethernet -Max users: 500+ Wifi users

Ubiquiti Unifi AC HD (UAP-AC-HD)

Add to cart Quick View

Sale

Add to cart

Ubiquiti Unifi AC HD (UAP-AC-HD) Access Point

The Ubiquiti UAP-AC-HD is and indoor/outdoor, high-performance, 802.11AC Wave 2 dual-band access point, capable of throughput speeds of up to 2533 Mbps and a maximum range of up to 122 meters. Ubiquiti Unifi AC HD (UAP-AC-HD) Access Point is an 802.11ac Wave 2 MU‑MIMO (Multi‑User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time – significantly increasing multi‑user throughput and overall user experience. The Ubiquiti UniFi AP AC HD features the latest in Wi-Fi 802.11AC Wave 2 MU-MIMO technology and a refined industrial design. The UAP-AC-HD is perfect for use both indoors and outdoors and has simultaneous dual band. The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi AC HD AP delivers up to 125% greater performance* than a typical Wave 1 AP Below are some deployment examples. For optimal performance, useMU-MIMO clients. SU-MIMO clients will also benefit and gain up to 10-20% greater performance when used with the UniFi AC HD AP. The Ubiquiti Unifi AC HD (UAP-AC-HD) Access Point is a high-performance, indoor/outdoor, 802.11 ac WiFi access point that utilizes Wave 2 technology to reach an impressive 2+ Gbps aggregate throughput rate with its 5 GHz (4×4 MU-MIMO) and 2.4 GHz (4×4 MIMO) bands. The UAP AC HD also has a focused antenna pattern to enhance your network’s capacity and reduce interference from neighboring access points. This access point is powered with PoE+ and is equipped with (2) GbE RJ45 ports and (1) USB port to support multiple connection types. The UAP AC HD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.

Ubiquiti Unifi AC HD (UAP-AC-HD) Access Point Specifications

-Environment: Indoor/outdoor -2.4 GHz rate: 800 Mbps -5 GHz rate: 1733 Mbps -PoE Mode: 802.3at PoE+ -Max power consumption: 17W -Ports: (2) 10/100/1000 Ethernet -Max users: 500+ Wifi users Ubiquiti UniFi AP AC HD – Technical Specification

General

Dimensions: 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89″)
Weight: 700g (1.54 lb)
- With mounting kits: 830g (1.83 lb)
Networking Interface: (2) 10/100/1000 Ethernet Ports
Buttons: Reset
Power Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported
Supported Voltage Range: 44 to 57VDC
Power Supply: 48V, 0.5A PoE Gigabit Adapter
Power save: Supported
Maximum Power Consumption
TX Power
- 2.4 GHz: 6-25 dBm
- 5GHz: 6-25dBm
Antennas
- 2.4 GHz: (2) Dual-Port, Dual-Polarity Antennas, 3 dBi each
- 5GHz: (2) Dual-Port, Dual-Polarity Antennas, 4 dBi each
WiFi Standards: 802.11 a/b/g/n/ac/ac-wave2
BSSID: Up to Four per Radio
Wireless SecurityL: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting: Wall/Ceiling (Kits Included)
Operating Temperature: -10 to 70° C (14 to 158° F)
Operating Humidity: 5 to 95% Noncondensing
Cerfiications: CE, FCC, IC

Advanced Traffic Management

VLAN: 802.1Q
Advanced QoS: Per-User Rate Limitingl
Guest Traffic Isolation: Supported
WMM: Voice, Video, Best Effort, and Background
Concurrent Clients: 500+

Supported Data Rates (Mbps)

Standard Data Rates
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80)
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Ubiquiti Unifi AC HD (UAP-AC-HD) Access Point

Add to cart Quick View