Yunqida YQD-512100G-LFOESS 5.12kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS)

KSh149,600.00 ( Ex VAT )

Key Features

In short, this all-in-one ESS stands out in the following five areas:

  • Integrated 5.12kWh battery and 6.2kW hybrid inverter, so it removes the need to separately wire and mount an inverter and battery bank
  • LiFePO4 (lithium iron phosphate) battery chemistry, which, in turn, offers greater thermal stability than standard lithium-ion batteries
  • 58.4V charging cut-off and 40V discharge cut-off, so the battery shares the same charge profile as Yunqida’s confirmed 512100-LFO battery line
  • 100A maximum continuous discharge current, which means the battery portion supports sustained loads without tripping protection
  • RS232/RS485/CAN communication with floor-stand installation, so it integrates with monitoring systems in a straightforward indoor setup
ENQUIRE
Yunqida YQD-512100G-LFOESS 5.12kWh Battery + 6.2kW Hybrid Inverter
Yunqida YQD-512100G-LFOESS 5.12kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS)
KSh149,600.00 ( Ex VAT )

Yunqida YQD-512100G-LFOESS 5.12kWh Battery + 6.2kW Hybrid Inverter (All-In-One ESS)

Specifically, the Yunqida YQD-512100G-LFOESS is an all-in-one energy storage system (ESS) that integrates a 51.2V, 100Ah lithium iron phosphate (LiFePO4) battery storing 5.12kWh, together with a 6.2kW hybrid inverter, inside a single housing. Because the inverter, battery, MPPT solar charger, and Battery Management System (BMS) all sit in one enclosure, it therefore eliminates the separate wiring and mounting work that a split inverter-plus-battery setup requires. In addition, the battery portion carries a 58.4V charging cut-off voltage and a 40V discharge cut-off voltage, consistent with Yunqida’s confirmed 512100-LFO battery specification, alongside a 100A maximum continuous discharge current.

Specifically, this all-in-one unit targets homes and small offices in Kenya that want a simple, compact backup power solution without assembling separate inverter and battery components. Since the unit combines a hybrid inverter with RS232/RS485/CAN communication and floor-stand installation — consistent with Yunqida’s other confirmed all-in-one ESS models — it therefore suits a straightforward plug-and-play setup in a store room or utility area. Meanwhile, we were unable to confirm the exact PV input voltage range, AC output current, dimensions, and weight for this specific 6.2kW variant on a public Yunqida datasheet, so we recommend verifying these figures against the supplier invoice before finalizing a listing.

Technical Specifications

Specifically, the table below details the specifications that are confirmed against Yunqida’s official battery datasheet and the shared architecture of Yunqida’s other all-in-one ESS models:

SpecificationDetails
ModelYunqida YQD-512100G-LFOESS
System TypeAll-In-One Energy Storage System (hybrid inverter + battery)
Battery ChemistryLithium Iron Phosphate (LiFePO4)
Battery Nominal Voltage51.2V
Battery Nominal Capacity100Ah
Battery Energy5.12kWh
Battery Charging Cut-off Voltage58.4V
Battery Discharge Cut-off Voltage40V
Battery Maximum Continuous Discharge Current100A
Inverter Rated Output6.2kW
Communication InterfaceRS232, RS485, CAN
Installation MethodFloor stand
ManufacturerGuangdong Yunqida New Energy Technology Co., Ltd.

Note: PV input voltage range, maximum AC output current, MPPT charging current, dimensions, weight, and cycle life were not available on a public Yunqida datasheet for this exact 6.2kW ESS variant at the time of writing. As a result, we recommend confirming these figures against the supplier invoice or physical unit before finalizing this listing.

Who This All-In-One ESS Is Best Suited For

As a result of this combination of specs, three types of users benefit most:

  • Homeowners wanting a simple, single-unit backup system, since the integrated inverter and battery remove the need for separate wiring and mounting work
  • Small offices and shops with limited installation space, because the compact all-in-one housing suits a store room or utility area without a dedicated battery room
  • Solar installers offering quick-deploy residential systems, who, thanks to the built-in MPPT charger and hybrid inverter, can commission a working backup system faster than a split-component installation

In addition, for a wider selection of backup power options, browse our full range of lithium batteries, since it includes complementary capacities for scaling a home or business power bank.

Recommended Action: Ultimately, choose the Yunqida YQD-512100G-LFOESS if a compact, single-unit backup system fits your installation better than a separate inverter and battery. Meanwhile, contact our team to confirm current stock and delivery timelines across Nairobi and upcountry.

Reviews

There are no reviews yet.

Be the first to review “Yunqida YQD-512100G-LFOESS 5.12kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS)”

Your email address will not be published. Required fields are marked *