2 Zone Fire Alarm Control Panel AW-CFP2166-2 Asenware

2 Zone Fire Alarm Control Panel AW-CFP2166-2 Asenware series conventional fire alarm panel is designed based on EN54 part 2?4 standard. And it is the central part of conventional fire alarm system, 2 Zone Fire Alarm Control Panel designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications. Asenware 2 Zone Fire Alarm Control Panel has 2 level control mode by a lock, fire and fault signal output, optical GSM module for fire alarm by SMS, 2 general sounders output, battery low protection function, silence button to stop buzzer and sounders, each zone can be disabled by a button, battery not included. 2 Zone Fire Alarm Control Panel is a typical one zone fire alarm control panel that is designed based on EN54 part 2 & 4 standard. It is the heart of the fire automatic alarm system, which can realize centralized control, 2 Zone Fire Alarm Control Panel can supply power to the detectors, manual call point, bell and more. One zone of the panel can match with 20 pieces fire alarm system accessories. Asenware 2 Zone Fire Alarm Control Panel fire alarm system wire drawing is for reference. Fire alarm control panels are designed to fulfill the requirements of EN54 parts 2 & 4 as well as being easy to install, operate and maintain. Being of modular construction

Asenware 2 Zone Fire Alarm Control Panel specifications

ITEM	1Zone panel	2Zone panel	4-16 Zone panel	4-32 Zone panel
Photo
Model No.	AW-CFP2166-01	AW-CFP2166-02	AW-CFP2166-04-16	AW-CFP2166-04-32
Power specification
Mains supply voltage	110VAC or 240VAC
Internal power supply	27.2VDC
Total output current limited	500mA @ 240VAC	500mA @ 240VAC	3A @ 240VAC	3A @ 240VAC
Main supply monitor for fault	Yes
Battery protection for low voltage	Yes
Batteries (default configuration)	12V2AH*2
Detector circuit specification
Number of circuit	1	2	4-16	4-32
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Line fault monitor for detector removal	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device	6.8k ? , 5% tolerance, 0.25W (colour code-blue, grey, red, gold)
Detector continuity diodes	Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value	470 to 680 ? , 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone	20 (based on a total detector current of 2mA, each detector consuming 100? A). Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zone	No limit
Sounder circuit specification
Number of general circuits	2
End of line resistor value	6.8k ? , 5% tolerance, 0.25W (colour code-blue, grey, red, gold)
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Outputs fused AT	400mA
Maximum number of bells @ 20mA of each sounder output	20
Fuses
Battery fuse	1.5A F 20mm
Sounder outputs	500mA F 20mm
Fire and fault output
Output type	NC and NO relay
Maximum current	100mA
Connection block
Largest acceptable conductor size	2.5mm 2
Smallest acceptable conductor size	0.75mm 2
Size and weight
Dimensions(mm)	272*200*70mm	320*231*90mm	395X502X124	362X565X124
Weight (without batteries)	4kg	5kg	7kg	8kg
Weight (with batteries)	5.8kg	6.8kg	9.6kg	12.5kg

9 Litres Foam Fire Extinguisher

Foam Fire Extinguisher conductivity test is an additional safety measure intended to safeguard users who accidentally use a foam fire extinguisher on an electrical fire – there is a risk to using a foam fire extinguisher this way, including the possibility of getting an electric shock. 9 Litres Foam Fire Extinguisher provide fast, powerful means of tackling flammable liquids. The foam forms a seal over the surface to prevent re-ignition. Ideal for multi-risk usage. Foam Extinguishers 1 Litre AFFF stored pressure extinguisher is suitable for class A & B (flammable solids and liquids) fire risks. Foam Extinguishers is Suitable for use in: heavy goods vehicle cabs, kitchens, caravans, small boats, offices and workshops. 9 Litres Foam Fire Extinguisher are typically used on fires involving Class A (Solid Combustible) and Class B (Flammable Liquid) risks, as they quickly extinguish the flame and are effective in preventing re-ignition. 9 Litres Foam Fire Extinguisher are 94% – 97% water, with a foam additive and work on solid fires by wetting and cooling the lighting object. The foam discharge also forms a physical barrier to prevent oxygen from re-igniting the flame, which is what makes this extinguisher particularly effective on contained liquid fires. 9 Litres Foam Fire Extinguisher is preferable to the Dry Powder types for use internally, as the subsequent clean-up required is far less and generally remains local to the fire, unlike the powder which can spread quite a distance and reduce visibility. Foam Fire Extinguisher although the AFFF extinguisher also comes with a 35kv electrical conductivity discharge test rating, which certifies users safety if the foam accidentally comes in contact with electricity, Foam Fire Extinguisher it is not recommended for direct use on live electrical equipment. For this reason it is commonly paired with a CO2 unit to make up a Fire Point that addresses all local risks.

Foam Extinguishers specifications

Product Code:	FFEX1J
Fire Rating:	5A / 21B
Charged Weight:	2 kg
Operating Pressure:	12 Bar
Discharge Time:	10 Seconds
Operating Temperature:	+5'C - +40'C
Height:	340mm
Diameter of Cylinder:	85mm
Range of Throw:	4m
Suitable For Use On Class:	A & B Type Fires