Yunqida YQD-5123001 15.36kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS, Stackable)

KSh320,800.00 ( Ex VAT )

Key Features

In short, this ESS stands out in the following five areas:

  • 15.36kWh usable LiFePO4 battery capacity (51.2V, 300Ah), which, therefore, covers a full evening of typical household loads through an outage
  • 6.2kW pure sine wave hybrid inverter, so sensitive electronics and moderate motor loads run cleanly
  • Built-in 120A MPPT solar charging with up to 6,500W of PV input, and in addition, a wide 60–450Vdc voltage range for flexible panel sizing
  • Stackable, all-in-one design that, as a result, lets you expand battery capacity later without replacing the inverter
  • CAN/RS232/RS485 communication, for straightforward monitoring, diagnostics, and integration with home energy management apps
ENQUIRE
Yunqida YQD-5123001 15.36kWh Battery + 6.2kW Hybrid Inverter
Yunqida YQD-5123001 15.36kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS, Stackable)
KSh320,800.00 ( Ex VAT )

Yunqida YQD-5123001 15.36kWh Battery + 6.2kW Hybrid Inverter — All-In-One Stackable ESS

The Yunqida YQD-5123001 is an all-in-one energy storage system (ESS) that pairs a 15.36kWh LiFePO4 battery with a 6.2kW pure sine wave hybrid inverter in a single floor-standing unit. In other words, the battery module, inverter, MPPT solar charge controller, and monitoring interface all come factory-matched, so there’s no separate component sizing to work out before installation. Specifically, the battery uses a single 300Ah cell bank at 51.2V nominal, and, as a result, the design is stackable: additional Yunqida battery modules can be added later to grow capacity without swapping out the inverter.

Meanwhile, the 6.2kW inverter section handles day-to-day household and small-office loads with room to spare, and it draws solar through a built-in MPPT charge controller rated for up to 6,500W of PV input. In addition, the wide 60–450V DC MPPT voltage range keeps the system flexible for different panel string configurations. For Kenyan buyers, this translates into steady backup through KPLC outages and load-shedding, whether the unit sits in a Ruaka home, a Kilimani apartment block, or an upcountry residence that relies on solar as its main power source.

Technical Specifications

Specifically, the table below sets out every core specification confirmed against the manufacturer’s battery datasheet, cross-checked against the matching 6.2kW hybrid inverter platform used across this product family:

SpecificationDetails
ModelYQD-5123001 (YQD-512300-LFO battery module)
System TypeAll-in-one hybrid ESS (battery + inverter), stackable
Battery ChemistryLiFePO4 (Lithium Iron Phosphate)
Nominal Battery Voltage51.2V
Nominal Capacity300Ah
Battery Energy15.36kWh
Cell InstallationFloor stand
Charge Temperature0°C to 45°C
Discharge Temperature-20°C to 65°C
Dimensions (Battery Module)535 x 825 x 245mm
Weight (Battery Module)113kg
Cooling MethodNatural cooling
Battery Warranty5 years
Inverter Rated Output Power6,200W (6.2kW)
Peak Power~12,400VA
Output Voltage220/230/240V AC ±5%
Output Frequency50/60Hz ±0.1%
WaveformPure sine wave
MPPT Charge Current120A
PV Voltage Range60–450V DC
Max Solar Input6,500W
CommunicationRS232, RS485, CAN
DisplayLCD
Operating Temperature (Inverter)-10°C to 50°C
CertificationsUN38.3, MSDS, IEC

Who This ESS Is Best Suited For

As a result of this combination of specs, three types of buyers benefit most:

  • Nairobi households managing regular KPLC load-shedding, because the 15.36kWh battery and 6.2kW inverter together back up lighting, electronics, and moderate appliance loads through multi-hour outages
  • Small offices and shops in areas like Kilimani and Westlands, since the MPPT solar charging pairs with grid or generator input to keep POS systems, Wi-Fi, and basic office equipment running without a noisy standby generator
  • Upcountry homeowners building an off-grid or hybrid solar setup, who, in turn, benefit from the stackable battery design to add capacity gradually as their budget or energy needs grow

If you’re comparing this against other capacities, our full range of <a href=”https://www.city.co.ke/product-category/batteries/lithium-batteries/”>lithium batteries</a> lays out the other configurations we currently stock.

Recommended Action

Whether you’re backing up a home in Kilimani against unpredictable KPLC outages or building a gradually-expandable solar setup upcountry, the YQD-5123001 pairs a solid 15.36kWh battery with a 6.2kW inverter that handles everyday loads comfortably. Consequently, it’s worth mapping your typical evening consumption before ordering, since that figure determines how many hours of backup this configuration realistically covers. Stop guessing at your backup runtime — reach out to our team to confirm the right YQD-5123001 setup for your property.

Sources:

Reviews

There are no reviews yet.

Be the first to review “Yunqida YQD-5123001 15.36kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS, Stackable)”

Your email address will not be published. Required fields are marked *