Yunqida YQD-5124002 23.56kWh Battery + 11kW Hybrid Inverter (ALL IN ONE ESS, Stackable)

KSh465,700.00 ( Ex VAT )

Key Features

In short, this ESS stands out in the following five areas:

  • 23.56kWh usable LiFePO4 battery capacity (51.2V, 230Ah x2), which, therefore, powers essential household or office loads through extended outages
  • 11kW continuous / 22kW peak hybrid inverter, so heavy inrush loads like pumps and motors start reliably
  • Dual MPPT solar charging with up to 11,000W combined PV input, and in addition, a wide 90–450Vdc MPPT voltage range for flexible panel string sizing
  • Stackable, all-in-one design that, as a result, lets you expand battery capacity later without replacing the inverter
  • Integrated RS232/RS485/CAN communication with an LCD display, for straightforward monitoring and installer diagnostics
ENQUIRE
Yunqida YQD-5124002 23.56kWh Battery + 11kW Hybrid Inverter (ALL IN ONE ESS, Stackable)
Yunqida YQD-5124002 23.56kWh Battery + 11kW Hybrid Inverter (ALL IN ONE ESS, Stackable)
KSh465,700.00 ( Ex VAT )

Yunqida YQD-5124002 23.56kWh Battery + 11kW Hybrid Inverter — All-In-One Stackable ESS

The Yunqida YQD-5124002 is an all-in-one energy storage system (ESS) that combines a 23.56kWh LiFePO4 battery with an 11kW pure sine wave hybrid inverter inside a single floor-standing unit. In other words, the battery, inverter, charge controller, and monitoring display all ship as one factory-matched system, so there’s no need to size and pair separate components yourself. Specifically, the battery pack uses two 230Ah cells at 51.2V nominal, and, as a result, the whole unit forms a stackable ESS: additional Yunqida battery modules can be added later to grow storage capacity as budget or load demand increases.

Meanwhile, the 11kW inverter section handles 11,000W of continuous output, with a 22,000W peak power rating that comfortably starts hard-to-run loads such as water pumps, borehole motors, and compressor fridges. In addition, dual MPPT solar inputs accept up to 11,000W of combined PV, which means the system can charge quickly from solar during the day and still hold enough reserve for the evening. For Nairobi homes and offices, this translates directly into dependable backup through KPLC load-shedding and unplanned outages, whether the installation sits in a Kilimani apartment, a Westlands office, or an upcountry homestead beyond the main grid.

Technical Specifications

Specifically, the table below details every core specification confirmed against the manufacturer datasheet:

SpecificationDetails
ModelYQD-5124002 (YQD-5124002-LFOESS)
System TypeAll-in-one hybrid ESS (battery + inverter), stackable
Battery ChemistryLiFePO4 (Lithium Iron Phosphate)
Nominal Battery Voltage51.2V
Nominal Capacity230Ah x2
Battery Energy23.56kWh
Max Continuous Discharge Current230A
Standard Charging Current<150A
Standard Discharge Current215A
Cycle Life6,000+ cycles
Cell InstallationFloor stand
Inverter Rated Output Power11,000W (11kW)
Peak Power22,000W
Output Voltage220/230/240V AC ±5%
Output Frequency50/60Hz ±0.1%
WaveformPure sine wave
AC Input Voltage Range90–280V AC / 170–280V AC
PV Voltage Range360–500Vdc (PV), 90–450Vdc (MPPT)
Max Combined Solar Input5,500W + 5,500W (11,000W total)
Max PV Charging Current150A
Max AC Charging Current150A
CommunicationRS232, RS485, CAN
DisplayLCD
Operating Temperature (Inverter)-10°C to 50°C
Operating Temperature (Battery)-20°C to 65°C
Operating Humidity20%–90%
Max Altitude4,000m (derated above 1,000m)
Noise Level<55dB
CertificationsUN38.3, MSDS, IEC

Who This ESS Is Best Suited For

As a result of this combination of specs, three types of buyers benefit most:

  • Nairobi homeowners facing frequent KPLC load-shedding, because the 23.56kWh battery and 11kW inverter together back up an entire household, including pumps, fridges, and electronics, through multi-hour outages
  • SMEs and offices in areas like Westlands and Kilimani, since 11kW of continuous power keeps servers, POS systems, and lighting running during grid interruptions without a diesel generator’s noise or fuel cost
  • Upcountry and off-grid property owners, who, in turn, benefit from dual MPPT solar charging and the stackable battery design to build an independent, expandable power system over time

If you’re comparing storage capacity across brands, our full range of <a href=”https://www.city.co.ke/product-category/batteries/lithium-batteries/”>lithium batteries</a> shows the other capacities and configurations currently available.

Recommended Action

Whether you’re backing up a home in Ruaka against unpredictable outages or building an independent power system for an upcountry property, the YQD-5124002 pairs a sizeable 23.56kWh battery with an 11kW inverter that starts demanding loads without hesitation. Consequently, it’s worth confirming your daily consumption and available roof space for solar before ordering, since these two factors determine how much of your load the system covers and how quickly it recharges. Stop planning around blackout schedules — reach out to our team to size the right YQD-5124002 configuration for your property.

Sources:

Reviews

There are no reviews yet.

Be the first to review “Yunqida YQD-5124002 23.56kWh Battery + 11kW Hybrid Inverter (ALL IN ONE ESS, Stackable)”

Your email address will not be published. Required fields are marked *