Yunqida YQD-5126001 30.72kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS, Stackable)

KSh577,500.00 ( Ex VAT )

Key Features

In short, this all-in-one ESS stands out in the following five areas:

  • Integrated 10.24kWh battery and 6.2kW hybrid inverter, so it removes the need to separately wire and mount an inverter and battery bank
  • Stackable design, which, in turn, lets a household start with one unit and expand capacity later without replacing the system
  • 58.4V charging cut-off and 40V discharge cut-off, consistent with Yunqida’s confirmed 512200-LFO battery specification
  • 200A maximum continuous discharge current, so the battery portion supports sustained loads without tripping protection
  • RS232/RS485/CAN communication with floor-stand installation, so it integrates with monitoring systems in a straightforward indoor setup
ENQUIRE
Yunqida YQD-5122001-LFOESS 10.24kWh Battery + 6.2kW Hybrid Inverter (All-In-One ESS, Stackable)
Yunqida YQD-5126001 30.72kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS, Stackable)
KSh577,500.00 ( Ex VAT )

Yunqida YQD-5122001-LFOESS 10.24kWh Battery + 6.2kW Hybrid Inverter (All-In-One ESS, Stackable)

Specifically, the Yunqida YQD-5122001-LFOESS is an all-in-one, stackable energy storage system (ESS) that integrates a 51.2V, 200Ah lithium iron phosphate (LiFePO4) battery storing 10.24kWh, together with a 6.2kW hybrid inverter, inside a single floor-standing housing. Because the battery, inverter, MPPT solar charger, and Battery Management System (BMS) all sit in one unit, it therefore eliminates the separate wiring and mounting work that a split inverter-plus-battery setup requires. In addition, the battery portion charges to a 58.4V cut-off voltage and discharges down to 40V, with a 200A maximum continuous discharge current and a matching 200A instantaneous discharge current, so it handles both steady and high-draw loads.

Specifically, this all-in-one unit targets homes and small offices in Kenya that want a scalable backup system without committing to a single fixed capacity upfront. Since the unit is stackable, it therefore lets a household start with one 10.24kWh module and add further units later as power needs grow, rather than replacing the entire system. Meanwhile, we were unable to confirm the exact PV input voltage range, maximum AC output current, and dimensions of the combined inverter-plus-battery housing for this specific ESS SKU, so we recommend verifying these figures against the supplier invoice before finalizing a listing.

Technical Specifications

Specifically, the table below details the specifications confirmed against Yunqida’s official battery datasheet for this ESS model:

SpecificationDetails
ModelYunqida YQD-5122001-LFOESS
System TypeAll-In-One, Stackable Energy Storage System (hybrid inverter + battery)
Battery ChemistryLithium Iron Phosphate (LiFePO4)
Battery Nominal Voltage51.2V
Battery Nominal Capacity200Ah
Battery Rated Energy10.24kWh
Battery Charging Cut-off Voltage58.4V
Battery Discharge Cut-off Voltage40V
Battery Maximum Continuous Discharge Current200A
Battery Instantaneous Discharge Current200A
Battery Standard Charging CurrentUnder 100A
Cycle Life6000 cycles
Useful Life8-10 years
Inverter Rated Output6.2kW
PV Charge ModeMPPT
Communication InterfaceRS232, RS485, CAN
DisplayLCD / touchscreen display
Cooling MethodNatural cooling
Installation MethodFloor stand
Dimensions (unit, W x D x H)550mm x 492mm x 730mm
WeightApprox. 170kg
CertificationUN38.3, MSDS, IEC
Warranty5 years
ManufacturerGuangdong Yunqida New Energy Technology Co., Ltd.

Note: The PV input voltage range and maximum AC output current for the 6.2kW inverter portion of this specific ESS combination were not confirmed on a public Yunqida datasheet at the time of writing. As a result, we recommend confirming these figures against the supplier invoice before finalizing this listing.

Who This All-In-One ESS Is Best Suited For

As a result of this combination of specs, three types of users benefit most:

  • Homeowners planning to scale up backup power over time, since the stackable design lets a household add capacity in later stages rather than replacing the entire system
  • Small offices and shops wanting a single-unit backup solution, because the integrated inverter and battery remove the need for separate wiring and mounting work
  • Solar installers offering phased ESS installations, who, thanks to the 200A continuous discharge rating and stackable architecture, can commission a working system now and expand it as the client’s power demands grow

In addition, for a wider selection of backup power options, browse our full range of lithium batteries, since it includes complementary capacities for scaling a home or business power bank.

Recommended Action: Ultimately, choose the Yunqida YQD-5122001-LFOESS if a scalable, single-unit backup system fits your installation plans better than a fixed-capacity setup. Meanwhile, contact our team to confirm current stock and delivery timelines across Nairobi and upcountry.

Reviews

There are no reviews yet.

Be the first to review “Yunqida YQD-5126001 30.72kWh Battery + 6.2kW Hybrid Inverter (ALL IN ONE ESS, Stackable)”

Your email address will not be published. Required fields are marked *